Over 20 Years Professional Experience,China Taiwan Quality,China Mainland Price.
| Place of Origin: | Xiamen,China |
|---|---|
| Brand Name: | BMS |
| Certification: | CE/SGS/ISO9001 |
| Model Number: | YX82-495-970 |
| Minimum Order Quantity: | 1 Set |
| Price: | Negotiate |
| Packaging Details: | The main machine is directly loaded into the container, and the electrical components are wrapped with plastic film. |
| Delivery Time: | 45days |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 30set/month |
| Power: | 7.5KW | Weight: | 9000 Kg |
|---|---|---|---|
| Key Selling Points: | Easy To Operate | Voltage: | 380V/420V/440V/460V/480V |
| Automatic Grade: | Automatic | Condition: | New |
| Application: | Roof | Core Components: | PLC, Motor, Pressure Vessel, Gear |
| High Light: | Shell Roof Roll Forming Machine,Roll Forming Machine For Stainless Steel,Boltless Roof Panel Roll Forming Machine |
||
► technical parameter
► Machine Components
1) Manual Uncoiler
Manual control steel coil inner bore shrinkage and stop
Max Feeding Width:1219mm
Coil ID Range:508±30mm
Max capacity:5ton
2) Manual Pre-Cutting
With Manual pre-cutter for easy operation and save material: The pre-cutter is conneted with PLC control system, PLC is calculating profile length within roll forming. Once material is required to change, PLC is calculating the length for total quantity and remind operator,production finishes and able to manual shearing material before roll forming so as to change material for new production. It is the advanced function and good for production to save material, avoid wasting. The rest sheet is continuous formed by forming system.
3) Roll Forming Machine
Body Base H450 by welding;
The side plate thickness to adopt the Q235t18mm;
The roller is made of Gcr 15 with hard chromium 0.04mm after finishing, Wire drawing polishing roller
shaft diameter Ø75mm (45# steel);
Gear chain drive,24 Station roll forming;
Main motor 11 KW, reducer R series;
Forming speed: 0-18 m/min.
4) Hydraulic Post Cutter
Post to cut, stop to cutting,Three pieces type of cutting blade design, no blanking;
Hydraulic motor: 3.0KW; Cutting pressure: 0-16Mpa;
Cutting tool material: Cr12Mov (= SKD11 with at least one million times of cutting life), Heat treatment to HRC58-62 degree;
The cutting power is provided by the independent engine hydraulic station (Look Below).
5) PLC Control System
Control The Quantity And Cutting Length Automatically;
Input The Production Data (Production Batch, pcs,Length,etc.) On The Touch Screen;
It Can Finish The Production Automatically;
Combined With: PLC, Inverter, Touch Screen, Encoder, etc.
6) Exit Rack
