Over 20 Years Professional Experience,China Taiwan Quality,China Mainland Price.
| Place of Origin: | xiamen, China |
|---|---|
| Brand Name: | BMS |
| Certification: | CE |
| Model Number: | YX18-75-760 |
| Minimum Order Quantity: | 1 Set |
| Price: | Negotiate |
| Packaging Details: | The main machine is directly loaded into the container, and the electrical components are wrapped with plastic film. |
| Delivery Time: | 45days |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 30set/month |
| Rolling Thinckness:: | 0.8-1.5mm | Shaft: | 80/95mm |
|---|---|---|---|
| Cutter Material: | Cr12MoV | Forming Station: | 18 Steps |
| Housing: | H450 Beam | Weight: | About 8T |
| Use: | Floor | Feeding Width: | 1219mm |
| High Light: | High Speed Corrugated Panel Roll Forming Machine,18 Stations Corrugated Roof Roll Forming Machine,7.5kw Corrugated Panel Roll Forming Machine |
||
18 Forming Stations Malaysia Corrugated Panel Roll Forming Machine With High Production Speed
1. Parameters
| Weight of main part |
about 8T
|
| Voltage | 380V/50HZ/3Phase (as customer`s request) |
| Frame | 450H steel welded |
| Drive mode | Chain Drice//Gear Drive |
| Material of rollers | 45# steel,CNC lathes,Heat Treatment,Hard Chrome Coated. |
| Material of shafts | 45# steel |
| Number of rollers: | 18 rollers |
| Main power | 7.5kw, Frequency speed control |
| Hydraulic motor power | 3kw |
| Hydraulic pressure range | 0-16Mpa |
| Control System | PLC system: Mitsubishi, Panasonic,Dental,Siemens,Schneider |
| Feeding Material width | Better as your drawing or from our designer |
| Feeding Thickness | 0.3-0.6mm |
| Effective width | Better as your drawing or from our designer |
| Productivity | 20m/min |
2. Profile Drawing
3. Material
Effective Width: 760mm
Feeding Width:1219/914mm
With Yield Strength:235-550Mpa
The Profile Size Tolerance:+/-0.5mm
4. Roll forming machien festures:
(1). Material of the profile: GI or color steel
(2). Side wall thickness: Q235 t18mm
(3). Machine roll forming speed: not less than 20m/min
(4). Transmission: by chain, one inch, single line
(5). Roll former has leveling bolts in the base for adjust the leveling
(6). Machine base frame adopt H beam welding steel
(7). The warranty of Malaysia Corrugated Panel Roll Forming Machine is 24 months after the client receives the machine
Within 24 months, we will courier the replacement parts to the client free of charg
(8). We offer technical support for the entire life of our machine
(9). We can send our technicians to install and train the workers in the clients factories with extra cost
5. Main Components
| No. | Name | Qty |
| 1 | Decoiler | 1 |
| 2 | Main roll forming machine | 1 |
| 3 | PLC Control box | 1 |
| 4 | Hydraulic station | 1 |
| 5 | Exit rack | 3 |
1). Pre-cutting device
The pre-cutter is connected with PLC control system,PL .C is calculating profile length within roll forming.Once material is
required to change,PLC is calculating the length for total quantity and remind operator,production finishes and able to manual shearing material before roll forming so as to change material for new production.It is the advanced function and good for production to save material, no waste.The pre-cutter is connected with PLC control system,PL .C is calculating profile length within roll forming.Once material is required to change,PLC is calculating the length for total quantity and remind operator,production finishes and able to manual shearing material before roll forming so as to change material for new production.It is the advanced function and good for production to save material, no waste.
