|Place of Origin:||China|
|Minimum Order Quantity:||1SET|
|Packaging Details:||Naked and Covered by Plastic Film Into Container|
|Working Material:||Galvanized Sheet(Gi),Cold Roll Steel(CRC),Hot Roll||Thickness:||0.7-1.0mm|
|Yield Strength:||245-550mpa||Decoiler:||Manual/Hydraulic For Options|
|Housing:||H350MM||Side Wall Thickness:||18MM|
YX13-59 High Quality Decorative Cable Channel Roll Forming Machine
1. Details of Decorative Cable Channel Forming Machine
|Applicable material:Galvanized Steel Coils, Hot Rolled Coils,Cold Rolled Coils,yield strength 245Mpa or 550Mpa|
|1)Manual Decoiler: one set|
|Max. feeding width: 500mm, coil ID range 470mm±30mm|
Capacity: Max. 3Ton
|2) Cold Rolling Mills:|
Rollers manufactured from bearing steel GCr15,precision machined,hard Chrome Coated with thickness 0.04mm(for longer life and anti-rust) ;
|Motor Driving,Gear chain transmission, 11 forming stations and 7 rollers(3 upper rollers and 4down rollers)for straightening and levelling)|
|Main Motor=4KW , Frequency speed control|
|Forming speed approx.12-18m/min|
|3)Hydraulic Cutting device|
|hydraulic motor: 2.2KW, Hydraulic pressure range: 0-12Mpa|
|Cutting tool material: Cr12Mov, Heat treatment|
|Cutter frame made from high quality 20mm steel plate by weld|
|Pre-punching & Pre-cutting, stop to punching, stop to cutting,|
|4)PLC Control System(Touch screen brand:Taiwan WEINVIEW,Inverter brand:Finland VOCAN/Denmark Danfoss ,Encoder brand: Japan Koyo)|
|Control the quantity and cutting length automatically|
|Combined with: PLC, Inverter, Touch Screen, Encoder, etc|
|Control Voltage 24V|
|5) Exit Rack Un-powered, two units|
2. Machine Features of Decorative Cable Channel Forming Machine
The advantages of Decorative Cable Channel Forming Machine as follows:
1. Easy operation, low maintenance cost
2. Material saving
3.Type of penel is wide used.
4. High requirments for finished products
made by high quality mold steel Cr12Mov with heat treatment
Name: Punching and cutting mold
Rollers manufactured from high quality bearing steel GCr15, CNC lathes, Heat Treatment.With black treatment or Hard-Chrome Coating for options.
Name: PLC control system
Brand: SIEMENS/SCHNEIDER ELECTRIC
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Encoder: KOYO/Omron (Japan brand)
* Inquiry and consulting support.
* Profile drawing and roll forming solution.
* View our Factory.
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.