Home >> Industry News
Forming Machine Maintenance Guidelines

Forming Machine Maintenance Guidelines

    

 The FORMTECH machine is generally divided into three main sections:
 

1.The electronic control parts: the traditional injection molding machine using the contact relay switching a variety of actions, often due to aging of the contact screw loose and contact out of the failure. To ensure that the electronic control stability, it should be normally replaced after the new one million times.  Dust attached and damp and other environmental factors of the operation to meet especially.  The modern injection machine is adopted by the integrated circuit no point, wire connection is greatly reduced and the obviously improved lead to create the unhealthy phenomenon, witch improve the stability. 
 2.The hydraulic part : the cleanliness of the hydraulic oil is the key point of the hydraulic system to maintain the quality of hydraulic oil, and therefore stability, higher quality of hydraulic oil. In addition to regular replacement, it should be properly controlled in order to avoid affecting the stability of the hydraulic action due to the deterioration of the operating temperature below its working temperature of 50C.
 3.The institutions part : In order to reduce the friction coefficient, reduce the wear and tear, it should be regularly do the lubrication and maintenance. The first board of the nut and tighten the screws should be checked regularly to avoid the draglink forcing to fracture. The mould-width adjusting mechanism should check the thick at regular periods to adjust mechanism transmission gear or relaxation phenomenon for big deflection.  And you should also pay attention to whether the linking piece screw loose gear, lubricating grease is enough, and so on. 

PreviousThe Handling And Maintenance Ma.. NextMetal Forming Machine Market An..

With more than 15years professional experience in roll forming machine industry,FORMTECH developed the 5TH Auto-changing type C purlin forming machine and proved to be very successful after 2years customer practice.It has been exported to many countries and get good feedback.

XIAMEN BRANDNEW FORMING MACHINERY CO.,LTD is a professional roll forming machine manufacturer based in China. The wide range of products we offer includes PU foaming machine, construction roof panel forming machine, tile roll forming machine, door roll forming machine, C purlin machine, stud machine, and more.

Company Brief: XIAMEN BRANDNEW FORMING MACHINERY CO.,LTD is a professional roll forming machine manufacturer, located in China. We provide an extensive line of products totaling over 100 types, including our roof panel machine, tile roof machine, purlin forming machine, shutter door machine, floor decking machine, keel machine, and many others. Our metal rolling equipment uses PLC control to ensure easy operation and high reliability